Below we will give you a brief overview of the various purposes and replacement periods.<\/p>\n
<\/span>a) Operating an LPG system privately in the household<\/span><\/h2>\n\n- Equipment and cylinder are indoors or outdoors<\/li>\n
- Replacement pressure regulator after ten years (recommendation)<\/li>\n
- Replacement of hose assembly after ten years<\/li>\n
- Guideline(s) replacement periods: TRF<\/li>\n<\/ul>\n
<\/span>b) Operating an LPG system commercially
\n<\/strong><\/span><\/h2>\n\n- Equipment and cylinder are indoors or outdoors<\/li>\n
- Replacement of components after ten years<\/li>\n
- Guideline(s) replacement periods: DGUV 110-010<\/li>\n<\/ul>\n
<\/span>c) Operating an LPG system in caravans\/motor caravans privately<\/span><\/h2>\n\n- Replacement of components after ten years<\/li>\n
- Guideline(s) replacement periods: DVGW G 607 (A)<\/li>\n<\/ul>\n
![\"\"](\"https:\/\/www.gok-blog.de\/wp-content\/uploads\/2016\/03\/Reisemobil-Wohnmobil-mobile-home-rv.jpg\" "\\"\\"")
<\/a>If you have a gas system in your caravan or motor caravan, you must adhere to certain replacement periods. A distinction is made between private and commercial use.<\/strong>
\u00a9 Pixabay<\/figcaption><\/figure>\n<\/span>d) Operating an LPG system in caravans\/motor caravans commercially<\/span><\/h2>\n\n- Replacement of components after ten years<\/li>\n
- Guideline(s) replacement periods:DGUV 110-010<\/li>\n<\/ul>\n
<\/span>e) Operating an LPG system for camping\/outdoors<\/span><\/h2>\n\n- Equipment and cylinder are outdoors<\/li>\n
- Replacement of components after ten years<\/li>\n
- Guideline(s) replacement periods: DVGW G 612 (A)<\/li>\n<\/ul>\n
<\/span>f) Operating an LPG system in marine applications (boats, water crafts) privately<\/span><\/h2>\n\n- Equipment is integrated into the boat<\/li>\n
- Replacement of components after six years<\/li>\n
- Guideline(s) replacement periods: DVGW G 608 (A)<\/li>\n<\/ul>\n
![\"\"](\"https:\/\/www.gok-blog.de\/wp-content\/uploads\/2016\/03\/Boot-Schiff-See-Hafen.jpg\" "\\"\\"")
<\/a>When using pressure regulators on boats and vessels, the replacement cycles are particularly short. This is due to the high degree of load.<\/strong>
\u00a9 Pixabay<\/figcaption><\/figure>\n<\/span>g) Operating an LPG system in marine applications (boats, water crafts) commercially<\/span><\/h2>\n\n- Equipment is integrated into the boat<\/li>\n
- Replacement of the pressure regulator after nine years at the latest<\/li>\n
- Replacement of the hose assembly at “appropriate time intervals”<\/li>\n
- Guideline(s) replacement periods:DGUV rule 110-006<\/li>\n<\/ul>\n
The replacement period always starts on the date of manufacture of the components, not on the date of installation.<\/p>\n![\"Pressure](\"https:\/\/www.gok-blog.de\/wp-content\/uploads\/2016\/10\/caravan_austauschfrist_blog_17-1030x627.jpg\" "\\"\\"")
<\/a>The year of manufacture is printed on the type label of the pressure regulator. On older models, the month of manufacture is printed in addition to the year of manufacture. For example, the code 08.15 (MM.YY) means that the pressure regulator was manufactured in August 2015. A tag is attached to the hose assemblies, upon which the year you need to replace the entire gas hose is printed.<\/figcaption><\/figure>\n<\/span>Graphical support for timely replacement<\/span><\/h2>\n
<\/span>b) Operating an LPG system commercially
\n<\/strong><\/span><\/h2>\n\n- Equipment and cylinder are indoors or outdoors<\/li>\n
- Replacement of components after ten years<\/li>\n
- Guideline(s) replacement periods: DGUV 110-010<\/li>\n<\/ul>\n
<\/span>c) Operating an LPG system in caravans\/motor caravans privately<\/span><\/h2>\n\n- Replacement of components after ten years<\/li>\n
- Guideline(s) replacement periods: DVGW G 607 (A)<\/li>\n<\/ul>\n
<\/a>If you have a gas system in your caravan or motor caravan, you must adhere to certain replacement periods. A distinction is made between private and commercial use.<\/strong>
\u00a9 Pixabay<\/figcaption><\/figure>\n<\/span>d) Operating an LPG system in caravans\/motor caravans commercially<\/span><\/h2>\n\n- Replacement of components after ten years<\/li>\n
- Guideline(s) replacement periods:DGUV 110-010<\/li>\n<\/ul>\n
<\/span>e) Operating an LPG system for camping\/outdoors<\/span><\/h2>\n\n- Equipment and cylinder are outdoors<\/li>\n
- Replacement of components after ten years<\/li>\n
- Guideline(s) replacement periods: DVGW G 612 (A)<\/li>\n<\/ul>\n
<\/span>f) Operating an LPG system in marine applications (boats, water crafts) privately<\/span><\/h2>\n\n- Equipment is integrated into the boat<\/li>\n
- Replacement of components after six years<\/li>\n
- Guideline(s) replacement periods: DVGW G 608 (A)<\/li>\n<\/ul>\n
<\/a>When using pressure regulators on boats and vessels, the replacement cycles are particularly short. This is due to the high degree of load.<\/strong>
\u00a9 Pixabay<\/figcaption><\/figure>\n<\/span>g) Operating an LPG system in marine applications (boats, water crafts) commercially<\/span><\/h2>\n\n- Equipment is integrated into the boat<\/li>\n
- Replacement of the pressure regulator after nine years at the latest<\/li>\n
- Replacement of the hose assembly at “appropriate time intervals”<\/li>\n
- Guideline(s) replacement periods:DGUV rule 110-006<\/li>\n<\/ul>\n
The replacement period always starts on the date of manufacture of the components, not on the date of installation.<\/p>\n<\/a>The year of manufacture is printed on the type label of the pressure regulator. On older models, the month of manufacture is printed in addition to the year of manufacture. For example, the code 08.15 (MM.YY) means that the pressure regulator was manufactured in August 2015. A tag is attached to the hose assemblies, upon which the year you need to replace the entire gas hose is printed.<\/figcaption><\/figure>\n<\/span>Graphical support for timely replacement<\/span><\/h2>\n
<\/span>c) Operating an LPG system in caravans\/motor caravans privately<\/span><\/h2>\n\n- Replacement of components after ten years<\/li>\n
- Guideline(s) replacement periods: DVGW G 607 (A)<\/li>\n<\/ul>\n
<\/a>If you have a gas system in your caravan or motor caravan, you must adhere to certain replacement periods. A distinction is made between private and commercial use.<\/strong>
\u00a9 Pixabay<\/figcaption><\/figure>\n<\/span>d) Operating an LPG system in caravans\/motor caravans commercially<\/span><\/h2>\n\n- Replacement of components after ten years<\/li>\n
- Guideline(s) replacement periods:DGUV 110-010<\/li>\n<\/ul>\n
<\/span>e) Operating an LPG system for camping\/outdoors<\/span><\/h2>\n\n- Equipment and cylinder are outdoors<\/li>\n
- Replacement of components after ten years<\/li>\n
- Guideline(s) replacement periods: DVGW G 612 (A)<\/li>\n<\/ul>\n
<\/span>f) Operating an LPG system in marine applications (boats, water crafts) privately<\/span><\/h2>\n\n- Equipment is integrated into the boat<\/li>\n
- Replacement of components after six years<\/li>\n
- Guideline(s) replacement periods: DVGW G 608 (A)<\/li>\n<\/ul>\n
<\/a>When using pressure regulators on boats and vessels, the replacement cycles are particularly short. This is due to the high degree of load.<\/strong>
\u00a9 Pixabay<\/figcaption><\/figure>\n<\/span>g) Operating an LPG system in marine applications (boats, water crafts) commercially<\/span><\/h2>\n\n- Equipment is integrated into the boat<\/li>\n
- Replacement of the pressure regulator after nine years at the latest<\/li>\n
- Replacement of the hose assembly at “appropriate time intervals”<\/li>\n
- Guideline(s) replacement periods:DGUV rule 110-006<\/li>\n<\/ul>\n
The replacement period always starts on the date of manufacture of the components, not on the date of installation.<\/p>\n<\/a>The year of manufacture is printed on the type label of the pressure regulator. On older models, the month of manufacture is printed in addition to the year of manufacture. For example, the code 08.15 (MM.YY) means that the pressure regulator was manufactured in August 2015. A tag is attached to the hose assemblies, upon which the year you need to replace the entire gas hose is printed.<\/figcaption><\/figure>\n<\/span>Graphical support for timely replacement<\/span><\/h2>\n
<\/a>\u00a9 Pixabay<\/figcaption><\/figure>\n
<\/span>d) Operating an LPG system in caravans\/motor caravans commercially<\/span><\/h2>\n\n- Replacement of components after ten years<\/li>\n
- Guideline(s) replacement periods:DGUV 110-010<\/li>\n<\/ul>\n
<\/span>e) Operating an LPG system for camping\/outdoors<\/span><\/h2>\n\n- Equipment and cylinder are outdoors<\/li>\n
- Replacement of components after ten years<\/li>\n
- Guideline(s) replacement periods: DVGW G 612 (A)<\/li>\n<\/ul>\n
<\/span>f) Operating an LPG system in marine applications (boats, water crafts) privately<\/span><\/h2>\n\n- Equipment is integrated into the boat<\/li>\n
- Replacement of components after six years<\/li>\n
- Guideline(s) replacement periods: DVGW G 608 (A)<\/li>\n<\/ul>\n
<\/a>When using pressure regulators on boats and vessels, the replacement cycles are particularly short. This is due to the high degree of load.<\/strong>
\u00a9 Pixabay<\/figcaption><\/figure>\n<\/span>g) Operating an LPG system in marine applications (boats, water crafts) commercially<\/span><\/h2>\n\n- Equipment is integrated into the boat<\/li>\n
- Replacement of the pressure regulator after nine years at the latest<\/li>\n
- Replacement of the hose assembly at “appropriate time intervals”<\/li>\n
- Guideline(s) replacement periods:DGUV rule 110-006<\/li>\n<\/ul>\n
The replacement period always starts on the date of manufacture of the components, not on the date of installation.<\/p>\n<\/a>The year of manufacture is printed on the type label of the pressure regulator. On older models, the month of manufacture is printed in addition to the year of manufacture. For example, the code 08.15 (MM.YY) means that the pressure regulator was manufactured in August 2015. A tag is attached to the hose assemblies, upon which the year you need to replace the entire gas hose is printed.<\/figcaption><\/figure>\n<\/span>Graphical support for timely replacement<\/span><\/h2>\n
<\/span>e) Operating an LPG system for camping\/outdoors<\/span><\/h2>\n\n- Equipment and cylinder are outdoors<\/li>\n
- Replacement of components after ten years<\/li>\n
- Guideline(s) replacement periods: DVGW G 612 (A)<\/li>\n<\/ul>\n
<\/span>f) Operating an LPG system in marine applications (boats, water crafts) privately<\/span><\/h2>\n\n- Equipment is integrated into the boat<\/li>\n
- Replacement of components after six years<\/li>\n
- Guideline(s) replacement periods: DVGW G 608 (A)<\/li>\n<\/ul>\n
<\/a>When using pressure regulators on boats and vessels, the replacement cycles are particularly short. This is due to the high degree of load.<\/strong>
\u00a9 Pixabay<\/figcaption><\/figure>\n<\/span>g) Operating an LPG system in marine applications (boats, water crafts) commercially<\/span><\/h2>\n\n- Equipment is integrated into the boat<\/li>\n
- Replacement of the pressure regulator after nine years at the latest<\/li>\n
- Replacement of the hose assembly at “appropriate time intervals”<\/li>\n
- Guideline(s) replacement periods:DGUV rule 110-006<\/li>\n<\/ul>\n
The replacement period always starts on the date of manufacture of the components, not on the date of installation.<\/p>\n<\/a>The year of manufacture is printed on the type label of the pressure regulator. On older models, the month of manufacture is printed in addition to the year of manufacture. For example, the code 08.15 (MM.YY) means that the pressure regulator was manufactured in August 2015. A tag is attached to the hose assemblies, upon which the year you need to replace the entire gas hose is printed.<\/figcaption><\/figure>\n<\/span>Graphical support for timely replacement<\/span><\/h2>\n
<\/span>f) Operating an LPG system in marine applications (boats, water crafts) privately<\/span><\/h2>\n\n- Equipment is integrated into the boat<\/li>\n
- Replacement of components after six years<\/li>\n
- Guideline(s) replacement periods: DVGW G 608 (A)<\/li>\n<\/ul>\n
<\/a>When using pressure regulators on boats and vessels, the replacement cycles are particularly short. This is due to the high degree of load.<\/strong>
\u00a9 Pixabay<\/figcaption><\/figure>\n<\/span>g) Operating an LPG system in marine applications (boats, water crafts) commercially<\/span><\/h2>\n\n- Equipment is integrated into the boat<\/li>\n
- Replacement of the pressure regulator after nine years at the latest<\/li>\n
- Replacement of the hose assembly at “appropriate time intervals”<\/li>\n
- Guideline(s) replacement periods:DGUV rule 110-006<\/li>\n<\/ul>\n
The replacement period always starts on the date of manufacture of the components, not on the date of installation.<\/p>\n<\/a>The year of manufacture is printed on the type label of the pressure regulator. On older models, the month of manufacture is printed in addition to the year of manufacture. For example, the code 08.15 (MM.YY) means that the pressure regulator was manufactured in August 2015. A tag is attached to the hose assemblies, upon which the year you need to replace the entire gas hose is printed.<\/figcaption><\/figure>\n<\/span>Graphical support for timely replacement<\/span><\/h2>\n
<\/a>\u00a9 Pixabay<\/figcaption><\/figure>\n
<\/span>g) Operating an LPG system in marine applications (boats, water crafts) commercially<\/span><\/h2>\n\n- Equipment is integrated into the boat<\/li>\n
- Replacement of the pressure regulator after nine years at the latest<\/li>\n
- Replacement of the hose assembly at “appropriate time intervals”<\/li>\n
- Guideline(s) replacement periods:DGUV rule 110-006<\/li>\n<\/ul>\n
The replacement period always starts on the date of manufacture of the components, not on the date of installation.<\/p>\n<\/a>The year of manufacture is printed on the type label of the pressure regulator. On older models, the month of manufacture is printed in addition to the year of manufacture. For example, the code 08.15 (MM.YY) means that the pressure regulator was manufactured in August 2015. A tag is attached to the hose assemblies, upon which the year you need to replace the entire gas hose is printed.<\/figcaption><\/figure>\n<\/span>Graphical support for timely replacement<\/span><\/h2>\n
The replacement period always starts on the date of manufacture of the components, not on the date of installation.<\/p>\n<\/a><\/span>Graphical support for timely replacement<\/span><\/h2>\n